Î÷¹ÏÓ°ÊÓ

The customer is a large sensor component manufacturer in Thailand, and the required equipment is for producing sensors raw materials. The customer's request is to calcine the water quenched glass at 500 ¡æ and grind it to 200 mesh. During the calcination and grinding process, there should be no mixing of mechanical iron. The initial particle size of the customer's water quenched glass is 10-20mm, and the fuel used for calcination is LPG. After grinding to 200 mesh, it enters the next airflow grinding process.¡­

The ZK1620A Raymond mill system consists of a host, a classifier, a blower, a pipeline system, a pulse dust collector, an electrical control system, and supporting equipment such as crushers, feeders, and elevators. It is mainly used for non-metallic mineral powder processing.¡­

The innovation of this project is that lepidolite and spodumene are roasted in the same conversion kiln, which improves the utilization of raw materials and better enables companies to cope with the cost inversion caused by the unstable price of lithium.¡­

In December 2017, Dade Technology (Dongguan) Co., Ltd. ordered a lithium production line with an annual output of 2,000 tons from Î÷¹ÏÓ°ÊÓ., Ltd. The main equipment includes a rotary kiln, ball mill, spiral weighing scale, granulator, desulfurization tower, and air compressor. etc. The on-site installation and commissioning of this project was completed at the end of December 2018.¡­

In 2023, a Russian industrial company reached a friendly cooperation with Î÷¹ÏÓ°ÊÓ., Ltd. and signed a general contracting project aimed at building an active lime production line with a daily output of 150 tons. The successful implementation of this project will further consolidate the cooperative relationship between the two parties and jointly promote their influence in the international market.¡­

Chengdu Building Materials Industrial Design Institute's 400T/D lime production line project is a strategic project aimed at building an efficient production line with an annual output of 400 tons of lime.¡­

This project adopts the Pidgeon process principle of magnesium smelting process, which uses calcined dolomite as raw material, ferrosilicon as reducing agent, and fluorite as catalyst for metered batching. After grinding and pressing into balls, they are called pellets. Put the pellets into the reduction tank, heat it to 1200¡ãC, and evacuate the interior to 13.3Pa or higher to generate magnesium vapor. Magnesium vapor forms crystallized magnesium, also known as crude magnesium, in the condenser at the front of the reduction tank. It is then refined with flux to produce commercial magnesium ingots, that is, refined magnesium.¡­

The owner is from a Bulgarian company founded in 2018. They inquired about the crusher used for tiles and bricks.¡­

¡­

?The client initially looks for a mini ball mill grinding machine with 10 to 12 kilograms of capacity, for laboratory tests, after communication, the material will be clinker. We recommend ¦µ 305¡Á350mm Lab Ball Mill (batch type) to fully satisfy with their application, the client agree and place an order soon.¡­